Tac-79 37mm Top Break Launcher

Tac-79 37mm Top Break Launcher is NOT firearm.  Do NOT fire any round meant for a firearm in any 37mm launcher.  Specifically, do not use an adapter to fire 12 gauge or centerfire rounds or rimfire rounds.  DO NOT use Beehive rounds.  This launcher is not a firearm and damage to yourself, or the launcher is likely if you violate this warning.  Further, you would be in violation of BATF rules.  The Warranty will be void under any of these conditions. Please review our Laws and Legality, Terms and Conditions, Privacy Policy.

The Tac-79 is a launcher that can be purchased in a variety of different configurations:

• TACTICALLY, WITH A COLLAPSIBLE AR STOCK

• CONVENIENTLY, AS A PISTOL WITH A 6″ BARREL

• HISTORICALLY, WITH AN AUTHENTIC MIL-SURP M79 FIBERGLASS STOCK

The Tac-79 comes with one 4″ Picatinny Rail mounted at the 12 o’clock position on the breech end of the barrel.

The barrel also has a 6″ rail on the bottom.

The basic specs of the Tac-79 are as follows:

Designation: Launcher, 37mm, Single Action, Exposed Hammer, Top Break

Country of Origin:  USA

Caliber: 37/38mm (1.5”) Rimmed Ammunition

Barrel Length: 12” (30.5cm). Fully enclosed rim. Transverse pin lockup

Dimensions (Tactical configuration):

• Length 23 – 27in. (59 – 69cm)

• Height 9in (23cm)

• Weight 4lb 14oz (2.2kg)

 Nominal Trigger Pull: 1.5lbs (0.7kg)

Safety: Ambidextrous Hammer Block

Stock: Six Position Adjustable AR stock

Foregrip: Vertical, may vary from illustration

Pistol Grip: A2 AR compatible grip

Materials: 6061-T6 Aluminum. 4140 Steel. All materials sourced from the USA

Finishes: MIL-A-8625 Type II Anodizing and Mil-DTL-13924D Black Oxide

Picatinny Rails: One top 4” and 6” bottom standard (Mil-STD-1913).

Drilled and tapped to accept any AR compatible butt stock using only the buffer tube, castle nut and alignment plate. Buffer and Buffer Spring are not required.